Folks, looking at removing rear lights to tint, is there a how 2 on here, or can someone guide me through please, for my Gen 3.5?

Not sure on gen 3 but on mine (gen 1) ya just take plastic panel off with screwdriver 4/5 screws nd then there 4 nuts to loose nd a gentle tug nd your down! Tug away from car

open boot
remove the base(thing that cover spare)remove the edges too by folding up the sides and pull out towards you.remove the corkscrew style clips that hold the panels on the back of the lights.in there are 3(or four)nuts.think its 3.undo and pull out lights.remove wires and bulbs.

if you cant get to you need to unbolt the two net clips on the boot door base(one ech side)pull out the plastic clips in the top next to the door then undo the screws at the bottoms(about 2 each side)and peel the sides back and expose all the bolts.undo.job done