i,m pretty sure that these ones were an optional extra so there cant be many around. Iv only ever seen them twice on the road compared to a hell of alot of many sightings of the others. hope this link works.
[ebay]290132854006[/ebay]

*Please use the eBay button to create eBay links. Thanks.

I bought the whole set, this was just a sample pic, as i dont think the link for the set i won would have worked as the listing had ended but i'll try anyway.
[ebay]130127844362[/ebay]

Yep, the link works fine

Nice set of wheels though. I think they are the best looking one's that come on the Gen3

Good price too

Nice one mate.

They're the same wheels as mine although they're not quite as shiny as mine. The good thing about these wheels is that they don't have to be delared as a mod as they're OEM and fitted to the coupe as an optional extra from new.

Good choice if I do say so myself

Good looking set of wheels. Before I got mines, these were there ones that I wanted for mine but could not find them anywhere and did not fancy paying stealer's prices.
Well done!
Alex

They are metal (sometimes plastic) rings that fit over the hub and inside the centre of the wheel to prevent wobble when you go over a certain speed as the bore of the centre of the wheel is not always an exact match for the wheel hubs, if you don't get them with your wheels you could pay up to £40 for a set of 4.

Wont the old ones be okay

Wont they be ok as they came off a coop anyway ???

Well I'd have thought so but when I had my Gen1 they didn't have spiggot rings but these wheels do they're metal spiggot rings, even though the wheels are from Hyunai dealers in UK I doubt they are coupe specific. I'd definately check that they are supplying them with your wheels as it may be a bit of a mare trying to get them afterwards. I had an XR3i with uprated alloys and they didn't have the spiggot rings, when I went over 50mph the car would wobble uncontrolably, I culdn't get a set that that were made for the wheels anywhere I had to get a set of platic ones that were the correct inside and outsude bore but they stuck out of the wheels too far and I had to cut and sand them to make them fit