Its all good news
The resonator is installed to reduce the induction noise, to keep everyone happy (to meet all db requirements in all countries, that type of thing).
| The UK Hyundai Coupe Site Forum http://forums.hyundaicoupe.info/ |
|
| Snorkus Mod http://forums.hyundaicoupe.info/viewtopic.php?f=30&t=5392 |
Page 1 of 7 |
| Author: | Xorro [ Tue Feb 27, 2007 3:57 pm ] |
| Post subject: | Snorkus Mod |
Use this post to discuss the DIY |
|
| Author: | DeadlySin [ Thu Apr 05, 2007 7:20 pm ] |
| Post subject: | |
can anyone tell me if there are any bad effects to losing the air duct and resonator? what was the point of it being installed by hyundai? Or is it all just good news when attempting this mod? |
|
| Author: | Xorro [ Fri Apr 06, 2007 11:28 am ] |
| Post subject: | |
Its all good news
The resonator is installed to reduce the induction noise, to keep everyone happy (to meet all db requirements in all countries, that type of thing). |
|
| Author: | paulgen3red [ Fri Apr 06, 2007 5:02 pm ] |
| Post subject: | warm air |
if you lose the air duct wont you just be sucking in war less dense air from the engine bay rather than cold air from outside. |
|
| Author: | KILA_THRILA [ Fri Apr 06, 2007 8:56 pm ] |
| Post subject: | Gud Point! |
Thats what i thought but apparently all air feeding to the engine is all heated up anyway...  KiLa
|
|
| Author: | donnyladF2 [ Sat Apr 07, 2007 10:11 am ] |
| Post subject: | |
to get around that problem you could fit a cold air feed. |
|
| Author: | TheBandit [ Fri Apr 13, 2007 1:30 pm ] |
| Post subject: | |
or use those cheapy tin-foil tubes just put like 4 of them in i used to do it and it worked quite well at feeding the air |
|
| Author: | Fruitbat [ Fri Apr 13, 2007 4:37 pm ] |
| Post subject: | |
The only reason cold air is better is because its more dense and hence theres actually more air in a smaller space. So as long as plenty of air is getting in, you'll be fine. Science Fact: Theres actually no such thing as cold air, or cold anything. Something can either be hot or... less hot. |
|
| Author: | iwrp1978 [ Mon Apr 16, 2007 8:08 am ] |
| Post subject: | |
did this mod yesterday, coupe seems to pull much better and sounds much better!! cheers, and only took 5 mins (if that) Ian |
|
| Author: | blackhawkf1 [ Fri Apr 20, 2007 1:45 pm ] |
| Post subject: | |
I also have done this mod, although it took longer than I though due to fuse box and the air box being in the way. But as a free 'upgrade' it's fantastic, the pull above 4000rpm now is really noticable, and the noise is great, didn't expect the noise to be so good, more lazy V8 than V6. 
|
|
| Author: | Brooksy [ Fri Apr 20, 2007 6:31 pm ] |
| Post subject: | |
where is this on the gen 3? if there is. cos know theres no pipe going to the front of the grill although i found a pipe coming from the bottom of the car to the battery area (under the cover) and saw that this goes down quite a bit. any ideas? |
|
| Author: | Fruitbat [ Sat Apr 21, 2007 4:09 pm ] |
| Post subject: | |
| Author: | psychocandy [ Mon Apr 23, 2007 12:48 pm ] |
| Post subject: | |
| Author: | LiDL [ Mon Apr 23, 2007 2:15 pm ] |
| Post subject: | |
| Author: | iwrp1978 [ Mon Apr 23, 2007 3:04 pm ] |
| Post subject: | |
my MPG has gone up a fair bit, not sure precisley but the needle is slower to reach the bottom! but I do have to admit, I do like the growl, even my 1.6 sounds so much more throaty when the pedal drops! |
|
| Author: | psychocandy [ Mon Apr 23, 2007 3:17 pm ] |
| Post subject: | |
| Author: | Brooksy [ Mon Apr 23, 2007 4:32 pm ] |
| Post subject: | |
| Author: | Fruitbat [ Mon Apr 23, 2007 8:20 pm ] |
| Post subject: | |
| Author: | Brooksy [ Mon Apr 23, 2007 8:47 pm ] |
| Post subject: | |
doesnt actually matter now tho cos i'll be getting the induction kit on there the end of this week i hope
plus getting my new nokia n95 too so i'll be kitted up with sat nav
|
|
| Author: | Dave_H_Superstar [ Fri May 04, 2007 1:53 pm ] |
| Post subject: | |
| Author: | Xorro [ Fri May 04, 2007 2:44 pm ] |
| Post subject: | |
| Author: | Dodgemeister [ Fri May 04, 2007 4:46 pm ] |
| Post subject: | |
| Author: | trl002 [ Fri May 04, 2007 4:54 pm ] |
| Post subject: | |
Have i done the Snorkus Mod right??? i hope so! |
|
| Author: | Fruitbat [ Sat May 05, 2007 3:18 pm ] |
| Post subject: | |
| Author: | psychocandy [ Thu May 10, 2007 3:36 pm ] |
| Post subject: | |
| Author: | Xorro [ Thu May 10, 2007 3:50 pm ] |
| Post subject: | |
| Author: | Dodgemeister [ Thu May 10, 2007 6:21 pm ] |
| Post subject: | |
| Author: | matt_izett87 [ Fri Jun 01, 2007 9:47 am ] |
| Post subject: | |
| Author: | Brooksy [ Fri Jun 01, 2007 10:58 am ] |
| Post subject: | |
| Author: | 100scout [ Fri Jun 01, 2007 11:57 am ] |
| Post subject: | |
| Author: | iwrp1978 [ Fri Jun 01, 2007 12:44 pm ] |
| Post subject: | |
| Author: | DereksDontRun [ Fri Jun 01, 2007 12:57 pm ] |
| Post subject: | |
| Author: | 100scout [ Fri Jun 01, 2007 1:16 pm ] |
| Post subject: | |
| Author: | pod355 [ Mon Jun 04, 2007 6:58 pm ] |
| Post subject: | |
| Author: | pod355 [ Fri Jun 08, 2007 10:07 am ] |
| Post subject: | |
| Author: | vic [ Sun Jun 17, 2007 10:33 pm ] |
| Post subject: | |
just done the snorkus mod to mine and its just a 1.6.sounds great,couldnt really tell if theres any power or economy increase.i just took out the elbow after the air box
|
|
| Author: | martin [ Wed Jun 20, 2007 12:44 pm ] |
| Post subject: | How to do this mod on a gen 3.5 ? |
Not quite sure about this mod. What exactly is being done/removed ? And how do you do this on a gen 3.5 (05 plate) coupe. (I think the air intake is different). Has anyone do it on a gen 3.5. (post pics) |
|
| Author: | DereksDontRun [ Wed Jun 20, 2007 1:26 pm ] |
| Post subject: | |
The square intake on the 3.5 is by the battery, under the plastic cover. Just remove that and you'll see the snorkle that resembles the image in the DIY guide. The mod is removing this, and the connecting pipe which goes down under the battery and back up behind the front-left light. as far as i understand the mod works on the gen1 & 2 by 1) increasing the air-flow because the snorkle-opening (cross-sectional area) is smaller than the pipe behind it and 2) removing any obstruction of the airflow - eg the resonator Whether it achieves anything on the 3.5 (and probably gen 3) is a different matter. After looking at my car (05 gen 3.5) the snorkle opening is much larger (pretty much the same as the pipe), so there's not the first benefit, and cant locate a resonator (and read a cpl reports of it not existing due to Hyundai cost-cutting and awareness to the mod being performed on the gen 1/2's) so no 2nd benefit. now, i could (and probably am) wrong tho...  love to hear of any1 with a gen3/3.5 who's done it and can report any findings
|
|
| Author: | alx_chung [ Wed Jun 20, 2007 2:19 pm ] |
| Post subject: | |
| Author: | scottf2 [ Tue Jul 24, 2007 2:56 pm ] |
| Post subject: | |
Removed the snorkul, but I cant see the bolts for the part at the bottom? I know just have 2 empty holes. One going right into the airbox, which is what this mod sets out to acheive, and one pointing down to a black plastic box. But I cant see where the holes are on this box to remove it? May just have to get out at the weekend and have a good look. |
|
| Author: | iwrp1978 [ Tue Jul 24, 2007 3:09 pm ] |
| Post subject: | |
that is the resonator, you don't need tor remove it, but if you want it of, the bolts are hard to get at unless you take out the battery shelf bit. Ian |
|
| Author: | scottf2 [ Tue Jul 24, 2007 3:12 pm ] |
| Post subject: | |
Cheers. Will leave that till the weekend then as it looks like the skies are about to open...yet again. Hooray for British summertime. |
|
| Author: | kerryred [ Sat Jul 28, 2007 4:40 pm ] |
| Post subject: | |
| Author: | Mickey O [ Sun Jul 29, 2007 12:36 am ] |
| Post subject: | |
| Author: | 100scout [ Sun Jul 29, 2007 8:04 am ] |
| Post subject: | |
| Author: | kerryred [ Sun Jul 29, 2007 1:41 pm ] |
| Post subject: | |
| Author: | Mickey O [ Sun Aug 05, 2007 1:17 am ] |
| Post subject: | |
| Author: | DaffyD [ Fri Aug 24, 2007 4:35 pm ] |
| Post subject: | |
| Author: | psychocandy [ Fri Aug 24, 2007 6:10 pm ] |
| Post subject: | |
| Author: | Rik'n'Vik [ Fri Aug 24, 2007 9:10 pm ] |
| Post subject: | |
| Page 1 of 7 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|