Valeo Hyper clutch (holds up to 350WHP)

XTD lightweight flywheel, weighing in at around 9lbs (stock is 22lbs iirc)

nice!!!! 350 whp would be some coupe!!!!

just put that cutch in with flywheel last week =p don't forget the release bearing!! think they should supply with it

ahh you got engine mounts too?? you'll love it with them on car just feels so right wth them on haha.. i think its good if im honest only juders tiny bit on pull away but there not undriveable like ppl say..i quite like it.. give it 50 miles or so to work its way in and its nice. Bit sharp when first on..but yh it probably won't have bearing.. hyundai for 20 pounds

yeah, my rear mount is knackered so have gone for a set of poly front and rear mounts from kspec.... when they finally turn up anyway, they were allegedly shipped 3 weeks ago after being ordered in november!!!


Hope so, looking at putting around 250bhp down so need something that can handle it and that is still driveable, my current clutch is either on or off anyway so im not too put off with that fact, and the judder cant be anywhere near as bad as i have now! haha. set off with less than 3k revs and it will judder like you are crossing a cattle grid, when driving if you plant the foot down it slips... not bad for a 270WHP rated clutch

nice one let me know what you think once fitted you should like the way it feels, at idle the car vibrates alot more.. ahh dw just go o hyundai and ask for the clutch release bearing they may have one or special order for next day 2 quid

Be glad when all these are fitted!! Will stop shaking my brains out, when you put foot down! :P

And thanks for getting me a quote Shell & booking it in...your welcome Mark!! x

thats ok no need to thank me

only available from hyundai directly at £27.

collecting it tomorrow and the car is in the garage monday so fingers crossed back on the road by tuesday at the latest, without getting shaken out of our seats!

all fitted now and my god i need to turn the boost down, Laggy as hell... to the fact that unless you floor it you almost stall it, and because of the lightweight flywheel you lose revs so easily even at a constant speed.


can see this being a PITA to get used to, at least it holds at high revs without slipping though, you just have to have it at high revs to get it to bite! lol