Hey guys

I've been a member here for awhile, but haven't posted up anything on my car. I'm from Vancouver BC, CANADA and have owned my tiburon for 2 years. I've spent the last year working on the engine mods which are nearing completion. (Stage 2 Supercharged) I decided to keep the stock look with the car, and just do small facelifts here and there. Hope you Enjoy =)

2003 Hyundai Tiburon GS-R (V6, 6 Speed) *Production Date January 6, 2002

. Interior .
Ark 6 Speed STS
Ark Billet Shifter Bushings
MNW E-Brake Tuscani Plate
MNW Ignition Tuscani Key Ring
CanadianTuscani Steering Wheel Emblem
Gunmetal Center Fascia
Door Chime Delete


. Exterior .
03 Clear Corner Headlights
6000k Bosch HID Low Beams
Chrome Amber Front Signals
MNW Engine Cover Emblem
Red-Out Tail Lights
Tuscani Emblems
Tuscani Wheel Caps
Ark Short Antenna
Silver OEM Grille
Black Fuel Cap Ring


. Performance .
NGM Sniper S/C (3.4" Pulley)
NGM Icebox
Injen SRI (Modded CAI Extension)
SSA-V2 Headers
Borla Exhaust (No Cat)
ClutchMasters FX500 6 Puck Unsprung Clutch
Fidanza Flywheel
310cc Injectors
NGK Iridium-X Plugs & Wires
Custom Ground Wire Kit
Poly Filled Motor & Tranny Mounts
Apexi Neo AFC
Drilled (Non Slotted) F+R Rotors
Sonar Ultra Sport Tires (SX-1 Evo)- 215/45/17
High Output Alternator
SlaveCylinder Spring Delete

Stage 0 Sniper (March - August 2009)




Stage 1 Iced Sniper (Sept 2009 - Current)



. Video .


. Current Best 1/4 Mile Time (#7483) (3.4" Pulley w/ IceBox).
14.291 @ 98.81 MPH @ Mission Raceway Park - October 9th 2009

Previous Best Time (3.4" Pulley no IceBox)
14.421 @ 98.08

. Plans .
Stage 2 S/C Parts gathering has begun

The car is a second and a half faster than when it was I/H/E. It is currently only at Stage 1 pushing 3 PSI without a tune (just running -35% closed fuel trim across the board for the 310cc injectors until i have a wideband), putting down 219 bhp (only around 190 to the wheels). Once the car is at stage 2 with a tune and reflash, i'll be looking for mid to low 13's. Quite a few guys running assassins and higher boosted tibs from the NGM site have commented that 14.2 for the stage 1 sniper is a good time. I agree though... Needs to be faster ^_^

Mother of God thats a good looking machine!!!better off keeping the standard look, gives ppl a bigger shock wen u leave em standing at the lights

For the covers, i just used a grinder w/ a zip disk to cut out what i wanted. I then just used some sandpaper and a file to smooth it all out. I'm sure a dremel tool with a cut off wheel would do the trick also

Great looking car man and that engine makes me wanna have a w**k lol