The UK Hyundai Coupe Site
Main Site    Coupe Models    Gallery    News    Supercharged Coupe    Readers Coupes    Links    Tuning    Events    D.I.Y.   Privacy Policy
It is currently Wed Oct 18, 2017 12:10 pm

Unfortunately no new posts or members are permitted,
however the forums will remain as an archive to retain all the useful information collected over the years.

All times are UTC [ DST ]


Welcome Guest! Feel free to peruse the site, or Register to get the full benefits.




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 38 posts ] 
Author Message
 Post subject: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 24, 2010 6:33 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
Have arranged with CC tuning to hold our long awaited Midlands Dyno Day.

Sunday 21st March in Burton

Prices start at £40 per person for a minimum of 5 cars, and drop to £35 each if we get at least 10 cars.

Your car will be put on the rollers and two to three runs will be done to make sure any particular run does not give a freak result.

We record the following results for each car run:

1) Bhp at the wheels

2) Torque at the wheels

3) Bhp at the flywheel

4) Torque at the flywheel

5) Boost pressure (forced induction only)

6) Air / fuel mix.

We can then plot all these variables against each other, giving you a clear picture of how your car is running.

The air fuel setting is taken from a wide band lambda sensor placed in the exhaust and gives both us and you a clear idea of how the car is running on the rollers, it also enables us to stop the session if we think damage could be done by continuing.

We will also get a digital copy of the printouts to load up on the site to compare.





1. MC183RUFC
2.
3.
4.
5.


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 24, 2010 7:23 pm 
Offline
My Coupe owns me!
My Coupe owns me!

Joined: Thu Oct 19, 2006 8:25 pm
Posts: 5833
Thank you Mark - appreciate you finishing that off - i got started thinking about a meet but... you know...

As long as the headers and smt are in - COUNT ME IN!

1. MC183RUFC
2. Androo007
3.
4.
5.


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 24, 2010 7:53 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
not a problem mate, gives me a kick up the arse to finish off all the little odds and ends that ive started on the car too now


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 24, 2010 8:43 pm 
Offline
My Coupe owns me!
My Coupe owns me!
User avatar

Joined: Fri Sep 14, 2007 5:09 pm
Posts: 8970
Location: anywhere in europe at any one time......but mostly sandbach
Coupe: gen3
1. MC183RUFC
2. Androo007
3. dupleman
4.
5.

speaking to work tomorrow


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 24, 2010 9:16 pm 
Offline
Yep, the Coupe is my life
Yep, the Coupe is my life

Joined: Fri Jun 22, 2007 8:06 pm
Posts: 4148
Location: West Norfolk
Christ! I need a job again, soon... :(


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Wed Jan 27, 2010 6:18 am 
Offline
Free-wheeling
Free-wheeling

Joined: Sun Jan 24, 2010 8:16 pm
Posts: 41
Location: Tamworth
Coupe: gen1
well hopefully ill have myself a coupe by then and ill be up for it if so (burtons ony bout 5 mins down road from me :D )

i will give a definate yes or no when i know if im definately gonna have my coupe by then or not but fingers crossed


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Wed Jan 27, 2010 11:25 am 
Offline
Free-wheeling
Free-wheeling

Joined: Thu Nov 19, 2009 2:52 pm
Posts: 106
Location: Aberdeen, Scotland
Coupe: gen3.5
If it wasnt so far from me i would have been well up for that. Shame though, cause thats a well good price for that.


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Thu Jan 28, 2010 9:33 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
Macker, Faz???

come on guys, surely we can get some more interested in doing this.


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Thu Jan 28, 2010 9:35 pm 
Offline
My Coupe owns me!
My Coupe owns me!
User avatar

Joined: Fri Sep 14, 2007 5:09 pm
Posts: 8970
Location: anywhere in europe at any one time......but mostly sandbach
Coupe: gen3
asked faz he said no.


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Thu Jan 28, 2010 10:39 pm 
Offline
Free-wheeling
Free-wheeling

Joined: Fri Apr 17, 2009 8:50 pm
Posts: 146
Location: Chesterfield
Might chuck the 206 on.......ijoke! :P

I'm sure i'll be attending this with you! :)


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Thu Jan 28, 2010 11:13 pm 
Offline
Moderator
Moderator
User avatar

Joined: Thu May 10, 2007 4:24 pm
Posts: 10971
Location: Aylesbury, Bucks
Coupe: gen3
I'll be there, not sure if I'll be on the rollers though.


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Thu Jan 28, 2010 11:16 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
1. mc183rufc
2. Androo007
3. dupleman
4.
5.

Maybe
1. Rik
2. Garbett
3. Scout


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Fri Jan 29, 2010 7:15 am 
Offline
I'm really motoring now
I'm really motoring now
User avatar

Joined: Tue Feb 17, 2009 8:33 pm
Posts: 408
Location: Gloucestershire
Coupe: gen3.5
got a postcode?


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Fri Jan 29, 2010 10:07 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
Unit 9, Greenline Business Park, Wellington Street, Burton upon Trent, DE14 2DS


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 2:41 am 
Offline
Free-wheeling
Free-wheeling

Joined: Tue May 12, 2009 4:52 pm
Posts: 56
Location: telford, shropshire
Coupe: gen1
count me in!


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 2:10 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
1. mc183rufc
2. Androo007
3. dupleman
4. Feed the Inferno
5.

Maybe
1. Rik
2. Garbett
3. Scout


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 5:36 pm 
Offline
Free-wheeling
Free-wheeling

Joined: Sun Jan 24, 2010 8:16 pm
Posts: 41
Location: Tamworth
Coupe: gen1
got my coupe now. gonna tax it tommorow morning (all being well) so count me in mate. although i will feel silly as i have a completely standard/stock coupe but be interesting to see it on there. plus be my first meet on here which is main thing :D

do you need the money beforehand or pay on the day?


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 6:10 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
1. mc183rufc
2. Androo007
3. dupleman
4. Feed the Inferno
5. Garbett

Maybe
1. Rik
2. Scout


so long as at least 5 people are definitely going to turn up then money wont be needed upfront mate.

Will be good to see what your stock model is pulling though, the guys will also be able to advise on what the best mods are if your wanting to increase it.


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 6:20 pm 
Offline
Free-wheeling
Free-wheeling

Joined: Sun Jan 24, 2010 8:16 pm
Posts: 41
Location: Tamworth
Coupe: gen1
oh i will be wanting to increase it lol. thinking of getting CAI or exhaust system sorted before then depending on if i can afford to lol. hopefully have something done, if not like you say, be interesting to see what stock output is (especially as its 1999 gen 1 lol)

forgot to ask too, what times the meet?


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 6:23 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
is it the 1.6 or the 2.0l?

we have had some surprise results in the past, im sure aaron and androoooooooooooooooooo had a thread somewhere with cars spec and their results, and some of the older cars had some alot higher than expected.


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 6:35 pm 
Offline
Free-wheeling
Free-wheeling

Joined: Sun Jan 24, 2010 8:16 pm
Posts: 41
Location: Tamworth
Coupe: gen1
its the 2.0 SE version - not that the SE matters for the power lol


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 6:46 pm 
Offline
Yep, the Coupe is my life
Yep, the Coupe is my life

Joined: Fri Jun 22, 2007 8:06 pm
Posts: 4148
Location: West Norfolk
mc183rufc wrote:
...a thread somewhere with cars spec and their results...

HERE!
Interesting figures to benchmark your car against.
garbett wrote:
oh i will be wanting to increase it lol. thinking of getting CAI or exhaust system sorted...

Induction mods will give around 5Hp and (particularly in the case of SRI) better throttle response, exhaust systems will unleash between 10 and 25Hp depending on whether its full system or catback, and either gain or loose you Torque depending on bore size, what cat is fitted etc...


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 6:54 pm 
Offline
Free-wheeling
Free-wheeling

Joined: Sun Jan 24, 2010 8:16 pm
Posts: 41
Location: Tamworth
Coupe: gen1
cool cheers Rik.

gonna phone insurance company up tommorow make sure they will allow me to make the changes. if not i wont be happy lol


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 9:26 pm 
Offline
My Coupe owns me!
My Coupe owns me!

Joined: Thu Oct 19, 2006 8:25 pm
Posts: 5833
Ok come on guys lets get more people down! We got 16 at Rayleigh once, so this should be dead easy to get people attending! All you northern lot, come on put your names down!


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 9:28 pm 
Offline
My Coupe owns me!
My Coupe owns me!
User avatar

Joined: Fri Sep 14, 2007 5:09 pm
Posts: 8970
Location: anywhere in europe at any one time......but mostly sandbach
Coupe: gen3
ahem........suvverners should concentrate on their own meets! :rollin :rollin :rollin
come on guys this is nearly the middle of the country!


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 10:02 pm 
Offline
Coupe pedal-car
Coupe pedal-car

Joined: Thu Jan 21, 2010 7:07 pm
Posts: 15
Location: West Sussex
Coupe: gen2
Quote:
Ok come on guys lets get more people down! We got 16 at Rayleigh once, so this should be dead easy to get people attending!

Go on then im up for it (but only cos you asked nicely) ;)
It'll be my first dyno day..... ever, so im looking forward to it. Am I correct in thinking the 21st is a Sunday?


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 10:12 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
1. mc183rufc
2. Androo007
3. dupleman
4. Feed the Inferno
5. Garbett
6. CarlGen2

Maybe
1. Rik
2. Scout

Thats 6 for starters, its a midlands location so im expecting afew more northeners and southeners aswell, afew more midlanders would be nice too ;)


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 10:29 pm 
Offline
My Coupe owns me!
My Coupe owns me!

Joined: Thu Oct 19, 2006 8:25 pm
Posts: 5833
Fantastic! Good stuff my man

yeah its a sunday.

Will be good to see the gains from the full exhaust/induction system *cough* GET IT ON *cough*


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 10:37 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
1. mc183rufc
2. Androo007
3. dupleman
4. Feed the Inferno
5. Garbett
6. CarlGen2
7. Steve B - or Androoooooooooo steals his car ;)

Maybe
1. Rik
2. Scout

Anybody got any contact details for Balbains or the guy that bought Dans Gen3?


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Sun Jan 31, 2010 10:49 pm 
Offline
My Coupe owns me!
My Coupe owns me!
User avatar

Joined: Fri Sep 14, 2007 5:09 pm
Posts: 8970
Location: anywhere in europe at any one time......but mostly sandbach
Coupe: gen3
androo007 wrote:
Fantastic! Good stuff my man

yeah its a sunday.

Will be good to see the gains from the full exhaust/induction system *cough* GET IT ON *cough*

aimed at who?


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Fri Feb 05, 2010 6:19 pm 
Offline
Moderator
Moderator
User avatar

Joined: Thu May 10, 2007 4:24 pm
Posts: 10971
Location: Aylesbury, Bucks
Coupe: gen3
Will this still be going ahead (I hope so)


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Fri Feb 05, 2010 6:31 pm 
Offline
Red-lining
Red-lining
User avatar

Joined: Fri May 05, 2006 10:20 pm
Posts: 2655
Location: Sunderland
Coupe: gen3
dont see why not fella, :)

I'm tempted.. dont want to go on the rollers tho.. I've got enough addictions.


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Fri Feb 05, 2010 6:34 pm 
Offline
Moderator
Moderator
User avatar

Joined: Thu May 10, 2007 4:24 pm
Posts: 10971
Location: Aylesbury, Bucks
Coupe: gen3
I was only going up for the craich and to meet some new peeps. I know what my car is producing stock. (No mods yet but it won't be long ;) )


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Fri Feb 05, 2010 7:03 pm 
Offline
I'm really motoring now
I'm really motoring now

Joined: Mon Mar 09, 2009 5:59 pm
Posts: 413
Location: birmingham
Coupe: gen1
put me down as a maybe will know closer to the time as to wether i can make it or not. wont be doing the dyno though. could some one put the details on facebook or the club site so i don't forget :lol


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Fri Feb 05, 2010 7:32 pm 
Offline
Yep, the Coupe is my life
Yep, the Coupe is my life

Joined: Fri Jun 22, 2007 8:06 pm
Posts: 4148
Location: West Norfolk
100scout wrote:
Will this still be going ahead (I hope so)

As said - don't see why not. I may or may not be in attendance, still no work - but I hope someone will let me know one way or t'other via eMail...

rikthornton@hotmail.com


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Fri Feb 05, 2010 8:41 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
Yeah this will still be going ahead, will transfer the thread over to UKHCC tonight when I get in from work. May even pick up afew members from there too


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Fri Feb 05, 2010 9:20 pm 
Offline
Free-wheeling
Free-wheeling

Joined: Sun Jan 24, 2010 8:16 pm
Posts: 41
Location: Tamworth
Coupe: gen1
good to hear its still happening. quite looking forward to my first meet :D


Top
 Profile  
Reply with quote  
 Post subject: Re: Midlands Dyno Day - 21/03/2010
PostPosted: Fri Feb 05, 2010 10:26 pm 
Offline
Picking up a bit of speed
Picking up a bit of speed

Joined: Tue Feb 12, 2008 9:52 pm
Posts: 916
Location: Rotherham
Coupe: gen1
follow it on: http://hyundaicoupeclub.co.uk/viewtopic.php?f=78&t=1941


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 38 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  

The UK Hyundai Coupe Site is not responsible for the accuracy of information contained with the Site or Forum • The views expressed on this forum are those of the individual poster, ukHCS does not take any responsibility for topic content. • Any companies advertising on or selling through the Site and Forums are in no way endorsed by or affiliated with ukHCS. Transactions undertaken with these companies is done so at the risk of the individual. • ukHCS is an independant website and forum, run, owned and designed by Xorro • ukHCS is not associated with Hyundai, their parent companies or any other car manufacturer • All ads displayed on this site are sorted and maintained by a third party and are not endorsed by ukHCS.