hi there,
as per previous post it is a door panel off job i'm afraid, but have no fear it is a very easy job, you need to find the following screws : 2 at either end of the panel, two in the door handle, remove the covers first to gain access and then one in the door opening handle, so 7 screws in total, when you have these off you need to prise the bottom of the panel gently and you should feel a few poppers come loose, then pull gently around the remaining bottom and sides of the panel and then you should be able to left the panel up away from the window. Note do not lift to high, the window buttons will still be connected to there wiring loom, once the panel is off then simply disconnect the loom and the panel is removed completely, sounds allot but really simple, only takes a couple of min's to remove.
|