Hey hey,

Few issues regarding my drivers side power window:
The passenger side window is working, but the switch on the drivers side is not illuminated, but the drivers window switch is illuminated but the window will not open...
Not even a click.
Is this likely to be a new motor job or just some electrical/wiring issue?
Any help appreciated.
Ash

By the sounds of it its probably the switch.
If its the motor then you can get them new off ebay for about £25.

switch cheapest so go there first.then motor

Thanks guys

Im guessing i would have to buy switches from a Hyundai dealer?
Any idea what £ ill be looking at?

could try ebay.
but dealer shouldnt be too dear for a switch...........just dont try getting motor from there.go ebay every time

look what i found..............
http://cgi.ebay.com/ebaymotors/03-08-Hy ... ccessories

pop off door handle, undo screws, unscrew one under the handle to open the door, 3 screws one side of door (not hinge side) pop off screw covers on the other side, unscrew them, grab it at the bottom and 'yank'?? have i missed anything?

dont have an american pull the bottom off

so am i.................

i have a spare switch you can try if you want

You could do it yourself in 30 minutes, as for getting a garage to do it probably around £45.

do it yourself its dead easy

I think I'll have a go myself. what i'm worried about is the coil they talk about unwinding!

Heyhey

Yeah never got the chance to whip the door card off, but i did remember what the previous owner said to me about having to give the door a whack if i want the window to open, so i did and lo and behold, the window opened so no motor issues just a new switch i reckon

i have switches if you wanna try them

yeah plz thanks alot

pm your address and il send them to you

I've got exactly the same problem with my drivers window....

When I press the switch it doesn't do anything although after having it pressed it makes a quiet click but does nothing.

When I take the door card off is it a simple change to do the motor? As for the switches do they just pop out...?

If it clicks (assuming you don't mean the noise of the switch clicking) then the relay is engaging. Which means the fault is with the motor or the actuator

Common problem is the wires fraying and jamming the mechanism. But it's easy enough to get the door cards off. There used to be a DIY on here but don't know if it still is around on the new site

The switch should just pop out of its hole in the door. I used a screwdriver and rag. Wasn't too difficult

Cheers guys, soon as this weather picks up I'll whip the door cards off. Sounds like it is the actuator/motor from what you say Joff.


Great!

switch posted today

Cheerz man thanks

If I can't hear a 'click' when I'm trying the switch, and it's not the switch thats the problem, am I right in guessing that it would be either the relay (whatever that is) or the actuator (uh?!) ? I know for a fact the window does move, albeit slowly, so I'm guessing it has to be either the actuator or the relay...
Any help appreciated
TVM

id say motor tbh