They are mostly the same, they get cut with a computer and you cant really go wrong with discs. The only thing i can see, dont get those pads with it, EBC suck so much, just do a little search on them.

The standard hyundai pads are decent as they are and in my experience brake better than ebc and some other after market pads.

You should also note that grooved discs will eat through pads quite quickly, i would recommend drilled only discs which look awesome on their own.

you *shouldnt* change just discs and leave the original pads as they will wear unevenly and wont have the same braking power while the pads grind back down to the flat surface of the new discs.

You can get "just discs" sets off ebay easily, then just pop into your nearest hyundai dealer and buy the pads.

try ebay theres a guy on there who does them for the coupe, there afewprobs with drilled and grooved, it feels like u have gravel under ya pads when you slam on as the pads eat into the discs and ull be forever cleaning break dust off ya wheels

Drilled disks have a reputation of being "weaker" mainly because under extreme stress and heat they can crack if not top notch quality.

I got these ones:[ebay]110448222870[/ebay]

I haven't had any problems with them. They look savage too.

for 5 Stud Wheels.

Sorry, I posted the wrong ad. Same seller tho.

My bad.

^^^
Should be OK.
OP has a Gen 2, so should be 4 stud anyway.
Do you notice any real difference?
Thinking of uprating the front discs on mine.